Balcony and Parapet Clamp Mount – Ø 60 × 3 mm Antenna Tube, 300 mm, Hot-Dip Galvanised
The AS32905 is a clamp-mounted antenna bracket designed for installation on a suitable balcony parapet, masonry parapet or comparable load-bearing structure.
The clamp design allows installation without drilling into a suitable parapet.
According to the available product data, the bracket is manufactured from steel and hot-dip galvanised in accordance with EN ISO 1461.
The antenna tube measures Ø 60 mm with a 3 mm wall thickness and a length of 300 mm.
Clamp range 80–150 mm
The clamping system is designed for suitable parapet or railing thicknesses between:
80 mm
150 mm
The actual thickness should be measured before ordering.
No drilling into the suitable parapet
The clamp system can be installed without drilling holes into the parapet itself.
This can be useful where permanent drilling is undesirable.
However, clamping pressure can still leave marks on sensitive or coated surfaces.
Ø 60 × 3 mm antenna tube
Tube specifications:
Outside diameter: Ø 60 mm
Wall thickness: 3 mm
Length: 300 mm
The antenna mast clamp must be compatible with a Ø 60 mm tube.
Suitable for satellite dishes up to Ø 100 cm
According to the available product data, the bracket is suitable for satellite dishes up to 100 cm in diameter.
Actual structural performance also depends on:
dish weight
wind area
installation height
parapet construction
clamp contact surfaces
building location
local wind conditions
Hot-dip galvanised steel
The steel construction is hot-dip galvanised according to EN ISO 1461.
This supports corrosion protection for permanent outdoor installation.
Suitable structural support required
The existing parapet or railing must be capable of safely absorbing the clamping, leverage and wind forces.
Particular care is required with:
glass railings
thin-walled metal profiles
plastic elements
lightweight railings
sensitive surface finishes
Compact 300 mm tube
The relatively short antenna tube keeps the installation compact and limits additional leverage compared with long mast constructions.
Typical applications
The AS32905 may be used for:
balcony satellite installations
terrace parapets
masonry parapets
suitable robust railing structures
installations where drilling into the parapet is undesirable
Technical specifications
Article reference: AS32905
Article number: 32905
Product type: Parapet / railing clamp antenna mount
Material: Steel
Surface: Hot-dip galvanised according to EN ISO 1461
Antenna tube: Ø 60 mm
Tube wall thickness: 3 mm
Tube length: 300 mm
Clamp range: 80–150 mm
Mounting method: Clamp mounting without drilling into suitable parapet
Suitable satellite dish size: Up to Ø 100 cm according to product data
Package contents
1 × AS32905 clamp mount with Ø 60 mm antenna tube
Satellite dish, LNB, coaxial cables and additional antenna equipment are not included unless separately specified.