Aluminium Balcony and Terrace Satellite Stand – 1 m Mast Ø 50 × 2 mm, for 500 × 500 mm Concrete Slabs
The AS30050 is a ballasted balcony and terrace stand designed for suitable satellite antennas where conventional wall mounting is not desired or possible.
According to the available product data, the structure is manufactured from a saltwater-resistant aluminium alloy with a stainless-steel-look finish.
The mast tube measures Ø 50 mm with a 2 mm wall thickness and a length of 1000 mm.
The base frame is manufactured from 35 × 35 × 3 mm angle profiles and is designed for 500 × 500 mm concrete slabs.
Adjustable rubber feet allow the mast to be levelled on suitable installation surfaces.
The complete structure can be dismantled for transport, storage or relocation.
For 500 × 500 mm concrete slabs
The base is designed for concrete slabs measuring:
500 × 500 mm
50 × 50 cm
The slabs are not included.
Two concrete slabs recommended
According to the available product information, two slabs are recommended for stabilisation.
The actual ballast required depends on:
slab weight
antenna size
antenna wind area
mast height
building exposure
local wind conditions
The recommendation should therefore not be interpreted as a universal wind-load approval.
Larger slab format
The 500 × 500 mm format allows comparatively heavy concrete slabs to be used depending on slab thickness.
This can increase available ballast, but the load-bearing capacity of the balcony or terrace must also be considered.
Ø 50 × 2 mm mast
Mast specifications:
Outside diameter: Ø 50 mm
Wall thickness: 2 mm
Length: 1000 mm
The antenna mast clamp must be compatible with a Ø 50 mm tube.
Adjustable rubber feet
According to the product data, the stand includes adjustable rubber feet.
These allow minor surface irregularities to be compensated and help align the mast vertically.
Aluminium construction
The stand is manufactured from aluminium.
Stainless-steel-look finish
The stainless-steel-look description refers to appearance only.
The actual material is aluminium, not stainless steel.
Saltwater-resistant alloy according to product data
The aluminium alloy is described as saltwater-resistant in the available product information.
Completely dismantlable
The structure can be fully dismantled, making it suitable for:
transport
storage
relocation
seasonal use
Balcony load capacity must be checked
Concrete slabs can add considerable weight.
The installation surface must therefore be suitable for the complete load of:
stand
ballast
antenna
additional equipment
Wind exposure must be considered
A satellite dish creates a significant wind area.
Higher balconies, building corners and exposed façades may experience substantially greater wind loads.
Marking the aligned position
The available application information recommends marking the exact final position of the stand after satellite alignment.
If the stand is moved, the marking can help return it to approximately the same location.
Reception should still be checked afterwards.
Typical applications
The AS30050 can be used for:
balcony satellite installations
terrace installations
rental properties
holiday homes
temporary or removable satellite systems
Technical specifications
Article reference: AS30050
Article number: 30050
EAN: 4050822300501
Product type: Balcony / terrace antenna stand
Material: Aluminium alloy
Material property according to product data: Saltwater-resistant
Finish: Stainless-steel look
Mast: Ø 50 × 2 mm
Mast length: 1000 mm
Base frame: 35 × 35 × 3 mm angle profile
Concrete slab size: 500 × 500 mm
Recommendation according to product data: 2 concrete slabs
Concrete slabs included: No
Feet: Adjustable rubber feet
Design: Completely dismantlable
Maximum antenna size: Not specified
Package contents
1 × AS30050 aluminium balcony stand
1 × Ø 50 × 2 mm mast, 1000 mm long
Base frame and adjustable rubber feet according to product configuration
Concrete slabs, satellite dish, LNB, coaxial cable and additional installation accessories are not included.