Bernstein Feeler gauge 21 blades
– measuring range from 0.05 – 2.0 mm
– 0.05 – 0.1 – 0.2 – 0.3 – 0.4 – 0.5 – 0.6 – 0.7 – 0.8 – 0.9 – 1.0 – 1.1 – 1.2 – 1.3 – 1.4 – 1.5 – 1.6 – 1.7 – 1.8 – 1. 9 – 2.0
– Dimensions in mm and inches
Tolerance as per T2 (see contents)
– INOX rust-free high-grade steel
– Conical blade shape
– Cover blade nickel-plated with locking screw
– Total length 100 mm
– Weight 190 g
Area of application
The gap sizes can be measured with the feeler gauges, consisting of a set (compartments) of hardened sheet metal strips with different thicknesses. Test and measuring equipment are among the most important tools and belong on every workbench or in every toolbox. Feeler gauges are used where it is not possible or difficult to measure with calipers or measuring instruments, often when adjusting electrical contact switches.
Technical product description
T2 TOLERANCES Table, see below!
To achieve a correct measurement result, you should watch out for the following errors when measuring. Hold the feeler gauge and the part to be measured still and straight, do not tilt them. Ideally, you should have a constant reference temperature of 20 degrees Celsius. Strong temperature fluctuations change the measurement results. Please check your feeler gauge regularly for damage, quirks, notches and remove dirt immediately.
Contents
T2 TOLERANCES
– nominal thickness 0.05 +/- 0.004 mm
– nominal thickness 0.10 +/- 0.005 mm
– nominal thickness 0.20 +/- 0.008 mm
– nominal thickness 0.30 +/- 0.009 mm
– nominal thickness 0.40 +/- 0.012 mm
– nominal thickness 0.50 +/- 0.014 mm
– nominal thickness 0.60 +/- 0.014 mm
– nominal thickness 0.70 +/- 0.017 mm
– nominal thickness 0.80 +/- 0.019 mm
– nominal thickness 0.90 +/- 0.022 mm
– nominal thickness 1.00 +/- 0.024 mm
– nominal thickness 1.10 +/- 0.024 mm
– nominal thickness 1.20 +/- 0.024 mm
– nominal thickness 1.30 +/- 0.028 mm
– nominal thickness 1.40 +/- 0.028 mm
– nominal thickness 1.50 +/- 0.028 mm
– nominal thickness 1.60 +/- 0.033 mm
– nominal thickness 1.70 +/- 0.033 mm
– nominal thickness 1.80 +/- 0.033 mm
– nominal thickness 1.90 +/- 0.035 mm
– nominal thickness 2.00 +/- 0.035 mm