Coaxial Cable Stripping Tool for RG59 / RG6 with Integrated HEX 11 F-Connector Wrench
The AS92001 is a compact coaxial cable stripping tool designed for preparing suitable coaxial cables before fitting F connectors.
It combines a two-blade cable stripper with an integrated HEX 11 wrench for compatible F connectors.
According to the available product data, the tool is suitable for RG59 and RG6 coaxial cables as well as cable dimensions 1.0/4.6 and 0.8/3.7.
Two blades for simultaneous stripping
Two fixed blades process different cable layers during the same operation.
With a compatible cable and the stop fitted, the tool produces approximately:
6.5 mm exposed centre conductor
6.5 mm prepared shielding section
This common 6.5/6.5 mm configuration is suitable for many F-connector systems.
Simple operation
Typical procedure:
Cut the coaxial cable cleanly and square.
Press the tool button.
Insert the cable up to the stop.
Release the button.
Rotate the tool approximately 5 to 10 times.
Remove the cable.
Remove the separated insulation sections.
Check centre conductor and shielding before fitting the connector.
Fixed blade adjustment
The blades are permanently installed and are not adjustable.
This eliminates manual blade-depth adjustment but requires the cable dimensions and construction to be compatible with the tool.
A test cut is recommended when processing a new cable type.
Removable cable stop
The stop can be removed where a longer centre conductor is required.
This provides additional flexibility for connector systems requiring a different cable preparation length.
Integrated HEX 11 F-connector wrench
The tool also incorporates a HEX 11 wrench for compatible F connectors.
It can be useful when installing or servicing connectors on:
LNBs
multiswitches
satellite receivers
antenna outlets
splitters
taps
amplifiers
The wrench area is reinforced internally with metal to reduce wear.
Typical applications
The tool can be used for:
satellite installations
cable TV systems
antenna systems
LNB cabling
multiswitch installations
replacing damaged F connectors
preparing coaxial cable during service work
Technical specifications
Article reference: AS92001
Article number: 92001
Product type: Coaxial cable stripping tool with F-connector wrench
Suitable cable types according to product data: RG59, RG6
Suitable cable dimensions: 1.0/4.6 and 0.8/3.7
Number of blades: 2
Blade adjustment: Fixed
Standard stripping dimensions: approx. 6.5 / 6.5 mm
Cable stop: Removable
Integrated wrench: HEX 11
Wrench reinforcement: Metal reinforced
Application: Satellite, antenna and coaxial cable installation
Package contents
1 × coaxial stripping tool with integrated HEX 11 F-connector wrench
Coaxial cable and F connectors are not included.