Inverto Ø40mm Unicable2 LNB for up to 32 receivers
This Unicable2 LNB allows you to connect up to 32 satellite receivers. All via a single cable. The EN50494/EN50607 protocol supports an unlimited number of transponders (also known as dynamic mode). Alternatively, the LNB can also be configured statically to convert a fixed number of transponder frequencies to IF frequencies (also known as static mode). This allows the connection of an unlimited number of receivers that can access up to 32 transponders simultaneously (or more, depending on the bandwidth of the transponder) based on the “digital channel stacking” technique.
The LNB can be powered via the receiver or a separate AC/DC power supply. The Unicable2 LNB is backward compatible with both EN50494 and EN50607 standards and integrates equally well into EN50494-only or mixed EN50494/EN50607 installations of compatible receivers.
Key features:
– Low phase noise UHD DVBS2 compliant – Very high cross-polarization isolation
– Low noise
– Very high cross-polarization isolation
– Programmable
– Dish alignment mode
– Low power consumption
Standard configuration:
32 user bands in dynamic mode:
– UB1 1210 MHz (EN50494+EN50607)
– UB2 1420 MHz (EN50494+EN50607)
– UB3 1680 MHz (EN50494+EN50607)
– UB4 2040 MHz (EN50494+EN50607)
– UB5 984 MHz (EN50494+EN50607)
– UB6 1020 MHz (EN50494+EN50607)
– UB7 1056 MHz (EN50494+EN50607)
– UB8 1092 MHz (EN50494+EN50607)
– UB9 1128 MHz (EN50607)
– UB10 1164 MHz (EN50607)
– UB11 1256 MHz (EN50607)
– UB12 1292 MHz (EN50607)
– UB13 1328 MHz (EN50607)
– UB14 1364 MHz (EN50607)
– UB15 1458 MHz (EN50607)
– UB16 1494 MHz (EN50607)
– UB17 1530 MHz (EN50607)
– UB18 1566 MHz (EN50607)
– UB19 1602 MHz (EN50607)
– UB20 1638 MHz (EN50607)
– UB21 1716 MHz (EN50607)
– UB22 1752 MHz (EN50607)
– UB23 1788 MHz (EN50607)
– UB24 1824 MHz (EN50607)
– UB25 1860 MHz (EN50607)
– UB26 1896 MHz (EN50607)
– UB27 1932 MHz (EN50607)
– UB28 1968 MHz (EN50607)
– UB29 2004 MHz (EN50607)
– UB30 2076 MHz (EN50607)
– UB31 2112 MHz (EN50607)
– UB32 2148 MHz (EN50607)
Technical data:
Input frequency range 10.7 GHz ~ 12.75 GHz
Noise figure 1 dB max.
LO frequency 10.4 GHz
LO frequency accuracy @25°C 1.0 MHz max.
LO initial accuracy 500 kHz max.
LO phase noise @1 kHz -60 dBc/Hz max.
LO phase noise @10 kHz -80 dBc/Hz max.
Gain 55 dB min.
Gain variation (full band) ±0.75 dB/UB max.
Image frequency suppression 40 dB min.
1 dB Compression point (@output) 0 dBm min.
Cross-polarization isolation 22 dB min.
Output VSWR 2.5 : 1
Current consumption 280 mA max. @18 VDC
Operating temperature -30 °C ~ +60 °C
Output impedance 75 Ω
Output connector: F-type (female)
Weight 152.5 g